NAMCO AquaJet, Operator'S Manual

Page: 29 / 57

Page PB
8. REMOVING AND REPLACING ASSEMBLIES AND PARTS.
WARNING
• Adjustments or maintenance on this machine should be carried out by
qualified personnel only.
• Do not make any alterations to this machine without prior approval. Doing
so could cause unforeseeable danger.
• Only parts specified by Namco Europe Ltd. should be used when replacing
or repairing parts (including screws).
• Ensure that power to the machine is turned OFF before commencing any
maintenance work (troubleshooting, repairs etc.)
• If performing work not described in this manual, be sure to contact your
distributor for instructions as no responsibility will be accepted for
damage or injury.
• Parts of the power supply, projector monitor and air compressor remain
hot or carry high voltage even after switching OFF and could cause burns
or electric shock. Take care not to touch these parts accidentally.
• Make sure that the machine is switched OFF before connecting or
disconnecting any plugs or connectors.
• When removing the mains connector from the machine, or the mains plug
from the wall outlet, always grasp the plug not the cable.
8-1 COMPRESSOR ASSEMBLY
NOTE:
There are no user serviceable parts on the compressor assembly.
Under no circumstances should any regulator valves be adjusted.
Altering the regulator valves could lead to serious damage to the system
or injury to personnel
WARNING
• Parts of the compressor become very hot during use. Take care not to
touch the compressor when it is hot.