Page PB
5. INSTALLATION
Notes on Installation
WARNING
NEVER turn the power to the machine ON until installation
has been completed.
WARNING
in order to prevent possible electric shocks, be sure that the
machine is connected to the mains supply with a securely
connected earthed plug.
WARNING
So that customers are not injured by the movement of the
Aqua-Jet, ensure that there is at least 500mm separation
between other machines or walls.
CAUTION
In order to avoid damage to the machine due to mis-operation,
ensure that the voltage of the mains supply is
230volts AC.
NOTE
If the location site of this machine has a polished floor it is
recommended that rubber pads are fitted under the level
adjusters to prevent the machine sliding on the floor.
NOTE
In order to gain access to the Power Supply and CPU assemblies,
make sure that the rear of the main cabinet is separated from a
wall or other machine by at least 500mm.
Summary of Contents for AquaJet
