Page 19
5-5 Adjusting the Projector
Due to vibration during moving and assembly of the machine, the projector
convergence may require adjustment. If this is necessary, adjust the projector
using the following procedure.
For details on how to adjust the projector, refer to the “Projector Adjustment
Manual”.
NOTE:
•
If the correct adjustment procedure is not followed, or the wrong buttons
are pressed, it may be impossible to return the projector to its normal
condition.
•
The details for adjusting the projector may differ depending upon which
projector is used, be sure to follow the adjustment procedure according to
the “Projector Adjustment Manual” that is supplied with the game.
1.
Remove the six security screws (M5x30) and remove the front door.
2.
Adjust the projector according to the “Projector Adjustment Manual”.
3.
When adjustment is complete, refit the front door.
Summary of Contents for AquaJet
