Page 37
8-3 Control Arm Assembly
8-3-1
Replacing the Accelerator Potentiometer
WARNING
•
Make sure that the power is turned OFF before
commencing any work.
1)
Remove the four security screws (M5x12) and remove the accelerator
cover.
3)
Disconnect the connector. Loosen the grub screw (M3x5) and remove
the potentiometer complete with its mounting bracket.
4)
Remove the potentiometer from the mounting bracket and replace
with a new potentiometer.
5)
Re-assemble in reverse order.
NOTE: When refitting the potentiometer and bracket ensure that the grub
screw engages on the flat of the potentiometer shaft, and the
wire harness is secured with the two cord grips so that it does not
get caught or pinched by the moveable section.
6)
Re-initialize the game.
(Refer to section 7 ‘Initialization’)
Summary of Contents for AquaJet
