NAMCO AquaJet, Operator'S Manual

Page: 12 / 57

Page 15
WARNING After the four hexagonal bolts have been removed, the
projector is only resting on the base. Take care that the
projector is not accidentally knocked or moved to prevent
the projector falling and causing injury.
4. Remove the two security screws (M5x30) and remove the small cover.
5. Remove the two pozi head screws (M5x30), unlock and remove the back
door only enough to be able to disconnect the fan connector.
6. Disconnect the fan connector and remove the back door fully.
7. Remove the four hexagonal bolts M10x130.
8. Lift the projector unit up by approx 10cm from the base then carry it
backward or forward and gently lower it to the ground.
9. When replacing the projector unit on top of the base, ensure that the
guides on the top of the base fit inside the projector unit base.
WARNING Take care not to trap fingers or clothing when replacing
the projector unit back on to the base.