![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876049.webp)
Page
44
6-7-6.
Replacing the Motor and Motor Brushes.
1)
Replacing the Motor Brush.
a)
Remove the rear cover (
Refer to section 6-7-1
, "Removing the Rear
Covers".)
b)
Remove the pozi head screws from the brush covers (located either
side of the motor), and remove the covers
c)
Replace the two brushes. (Ensure that the brushes slide freely into the
motor when replacing.)
2)
Replacing the Motor
a)
Remove the two V belts (
Refer to section 6-7-5
, "Removing the V Belts".)
b)
Disconnect the motor connector.
c)
Remove the motor with the slider bracket attached.
d)
Remove the four nuts (M10), and remove the motor from the slider bracket.
e)
When installing the motor, adjust the V belts as described in
section 6-7-5,
"Installing the V Belts".
6-7-7.
Replacing the Motor Fuse
The fuse is located as shown in
section 6-7-2
, page 37.
1)
Remove the rubber cap B.
2)
Turn the fuse cap anticlockwise half a turn, and remove the cap and fuse.
3)
Replace the fuse (5A, Slo-Blo).
Summary of Contents for ACE DRIVER DELUXE
