NAMCO ACE DRIVER DELUXE, Operator'S Manual

Page: 46 / 98

Page 41
2) Notes on Installing the Castor Unit
a) Install the castor unit in the roller
base, and tighten the four hex head
bolts (M10x30).
b) Use the nut locking bracket to turn the
nut towards the link arm and set the
spacing between the nut and housing
as shown in fig A.
This space should be set so that the
nut just grips the spacer section of the
locking bracket to the housing as
shown in fig B.
c) Refit the nut locking bracket using the
hex head bolt (M8x20).
d) Connect the link rod and link arm.
Ensure this is done as shown in fig C.
Note
The steering will not work
properly if the direction is incorrect.
e) Refit the rear covers (L) and (R), and
rear safety fence.