![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876030.webp)
Page
25
6-3-3.
Removing the Shield Case
1)
Remove the rear cover (L).
2)
Remove the Pozi head screw (M4x10), and remove the earth terminal.
(
Note:
Be careful not to lose the internal washer (M4).
3)
Disconnect the two connectors on the EMI board, the AC fan connector,
and the four connectors on the I/O PCB.
4)
Remove the two Pozi head screws (M5x12), then remove the shield case.
6-3-4.
Removing the I/O Board
1)
Pull out the shield case until the I/O board can be seen.
(Refer to section 6-3-3, above, "Removing the Shield Case".)
2)
Remove the four Pozi head screws (M3x20).
(
Note:
Be careful not to lose the four nylon spacers.
3)
Remove the I/O PCB.
Summary of Contents for ACE DRIVER DELUXE
