Page
20
5)
Turn the power to each machine "ON", and set the PCB ID using the test mode.
(Refer to section 5-3-2, "Setting the Game Options"
(page 11))
Note:
Settings other than those described will cause the machine to operate
incorrectly.
5-4-1
Setting the Link Switches
The link switches are used to set the connection between seats and machines.
1). Setting only one machine (2 seats)
Set the link switches to "ON", "INT", and "ON".
Note:
Do not use a link cable.
2)
Setting two or more machines.
Set the link switches to "ON", "EXT", and "ON".
3)
Install the connector cover using
the two screws (M4x10).
The link procedure is now complete.
4)
Setting for faulty PCB.
If the game PCB of only one side is faulty, set the link on that side to "OFF"
[Example of setting for faulty left side]
Summary of Contents for ACE DRIVER DELUXE
