![background image](http://html1.mh-extra.com/html/namco/ace-driver-deluxe/ace-driver-deluxe_operators-manual_3156876035.webp)
Page
30
6-5-3.
Replacing the Steering Drive PCB
1)
Remove the shift assemble (
Refer to section 6-5-2
, "Shift Assy
Maintenance".)
2)
Remove the six security screws (M5x12), and slide the inner panel towards
the steering wheel.
3)
Remove the two security screws (M5x12) and the two security screws
(M5x20), and remove the nose cover. (To remove the M5x20 security
screws, push the seat assembly fully to the left and right.
(
Refer to section 6-7-1
, "Removing the Rear Covers (L), (R)")
4)
Remove the nose cover, then disconnect the four connectors on the PCB.
5)
Remove the four nuts (M4), and remove the PCB complete with it's base.
6)
Remove the four pozi head screws (M3x10), and remove the PCB from it's
base.
Summary of Contents for ACE DRIVER DELUXE
