NAMCO ACE DRIVER DELUXE, Operator'S Manual

Page: 12 / 98

Page 7
3-4 Notes on Handling
DANGER The Mains voltage to this machine should be within the range of
220 to 240v AC and the transformer input matched accordingly.
DANGER
Be sure that the power is turned OFF when replacing parts and
connecting/disconnecting connectors.
DANGER to prevent possible electric shocks due to failure, this machine MUST
be
fitted with a securely connected earthed plug.
DANGER The monitor and power supply contain areas of very high voltage. Be
extremely careful when inspecting or making adjustments.
DANGER
When unplugging the game from an electrical outlet, always grasp the
plug, not the mains lead.
NOTES:
• Always return PC Boards to your dealer for repair. Never test the PCB for
continuity with a multimeter or similar device. The PCB contains sensitive
devices which could be damaged or even destroyed by the internal voltage of
such test equipment.
• Adjustments are required after replacing the game PCB, ROM, Steering Assy,
AB Pedal Assy and control pots.
Adjustments should be performed as described in section 5-4, "Adjustments
when Replacing Parts"
(page 19).
• After initial installation or if the number of machines linked together changes, it
may be necessary to use the test mode to change the settings and link switch
settings. (Refer to section5-4, "Linking Two or More Machines"
(page 19).