NAL Research Corporation (451-93156-002A)
32
Read Command: +CMOD?
Query the current call mode settings. The response is in the form:
+CMOD: <mode>
Test Command: +CMOD=?
List the supported call modes. The response is in the form:
+CMOD: (supported <mode>s)
A.8.42 +CNMI – New SMS Message Indications to DTE
Set Command: +CNMI=[<mode>[,<mt>[,<bm>[,<ds>[, <bfr>]]]]]
Set command selects the procedure, how receiving of new messages from the network is
indicated to the DTE when DTE is active, e.g. DTR signal is ON.
Valid values for <mode> are:
0
Buffer unsolicited result codes in the A3LA-RM. If result code buffer is full, older
indications are discarded and replaced with the new received indications. (default)
1
Discard indication and reject new received message unsolicited result codes when
A3LA-RM-DTE link is reserved (e.g. in in-call data mode). Otherwise forward them
directly to the DTE.
2
Buffer unsolicited result codes in the A3LA-RM when A3LA-RM-DTE link is reserved
(e.g. in in-call data mode) and flush them to the DTE after reservation. Otherwise
forward them directly to the DTE.
Valid values for <mt> are:
0
No SMS-DELIVER indications are routed to the DTE. (default)
1
If SMS-DELIVER is stored in the A3LA-RM, indication of the memory location is
routed to the DTE using unsolicited result code:
+CMTI: <mem>,<index>
2
SMS-DELIVERs (except class 2 messages and messages in the message waiting
indication group (store message)) are routed directly to the TE using unsolicited
result code:
+CMT: [<alpha>],<length><CR><LF><pdu> (PDU mode)
3
Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes
defined in <mt>=2. Messages of other data coding schemes result in indication as
defined in <mt>=1.
Valid values for <bm> are:
0
No CBM indications are routed to the DTE. (default)
Valid values for <ds> are:
0
No SMS-STATUS-REPORTs are routed to the DTE. (default)
1
SMS-STATUS-REPORTs are routed to the DTE using unsolicited result code:
+CDS: <length><CR><LF><pdu> (PDU mode)
Valid values for <bfr> are:
