NAiS AFP3431, Manual Book

Page: 32 / 59

4.3 Exiting parameter settings
The followings describe how to check set parameters.
1. Click [Check] button.
Appropriate check to the set type will be conducted. ( The illustration below is E-type. )
2. Parameters will be checked.
If a parameter is outside the setting range, the focus will jump into its edit box automatically.
Conduct a correction based on the setting range that is shown as a guide below the dialog box.
Repeat the procedure 1 and 2 until all the errors are cleared.
3. Click [OK] button and close this dialog box.
4-6