NAiS AFP3431, Manual Book

Page: 17 / 59

3. The initial screen of Configurator P3 appears.
When Configurator P3 is started normally, the following initial screen is displayed.
■ Hint
To upload parameters or positioning point data from the positioning unit, click [ OK ].
When Configurator P3 is started, select [
Online
]
Î
[
Upload from unit
].
You may change the unit type later.
When Configurator P3 is started, select [
Online ] Î [ Unit type & Axis mode… ].
A dialog box to select a unit type appears.
■ Exit Configurator P3.
To exit Configurator P3, click [
File
] on the menu bar, and select [
Exit
] on the displayed menu.
You can also exit it by clicking [ Close ] at the upper right corner of the screen.
1-9