English
User's Manual
of GNF001
Version 1, July 2023
- 19 -
5.9.4
Speed setting:
Press the
key on the control panel
→
make the
numbers in the Speed/Rcfdisplay flash
→
turn the parameter
adjustment knob key to set the speed to 5000. Note: The Rf value is
automatically converted with the speed value;
5.9.5
time setting
：
On the control panel, press the
key
→
make the
number in the time display column flash (the corresponding 2-digit Unit
of time)
→
turn the parameter adjustment knob key to set the time to 30.
The selected parameter adjustment situation is as follows:
the parameter adjustment knob key can be pressed
vertically downwards or the system will automatically flash three
times as the default.
5.9.6
ACCEL/DECEL speed up and down setting (the acceleration and
deceleration settings for starting the machine to run the rotor to the
set speed and stopping the machine from running, with values
ranging from 0 to 9. The higher the value, the shorter the time it
takes):
Press the
key on the control panel,
→
make the numbers in
the Acc display bar flash
→
turn the parameter adjustment knob key to
set the speed to 6. Press the
key again to make the numbers in
the Dec display flash. Rotate the parameter adjustment knob to set the
speed to 3. Note: When DEC is set to 0, the shutdown is free parking, and
the system has no brake intervention!