English
User's Manual
of GNF001
Version 1, July 2023
- 14 -
10-14. Stored procedure shortcut call setting key
15. Press this key during non program operations to instantly set various
centrifugal parameters (NORMAL)
16. Display area for turning number setting
17. Display area for setting the lifting rate
18. Stored procedure open or corresponding program number display area
19. Door cover status display area
20. Information (fault) display code area
21. Set the display area for relative centrifugal force and real-time
relative centrifugal force
22. Set speed and real-time speed display area
23. Set centrifugal time and display area for positive or negative
counting
24. Set temperature and real-time temperature display area
5.2 Power on
Connect one end of the power cord provided with the machine to the right rear
power socket, and the other end to the mains power supply. The mains power supply
should use a separate socket. The power range used in this machine is AC220V
±
10% 50Hz/60Hz. After connecting, turn on the power switch located on the right side
of the machine. The LCD color display on the control panel lights up. After the self
inspection of the machine is completed, enter the Home screen, and now you can
proceed to the next step.
5.3 open
Press the door open button on the control panel once, the buzzer will sound a prompt
sound and the display screen door cover will be displayed
The status display area displays the door cover opening symbol screen, and then the
door cover needs to be lifted up by hand to fully open the door cover, and the inner
cavity will be presented to the user.
If a malfunction occurs and the door cover cannot be automatically opened, if it
is necessary to remove the items inside the chamber, manual door opening can be
used, as detailed in "2.3.2".
5.4 Close
Please grip both sides of the door cover with both your left and right hands, and
gently close the door cover. After the door cover is locked, the machine will sound a
"Didi" prompt and the "Door Cover Status Display Symbol" on the display screen will
light up the door cover closed status.
Note: The door cover is not properly closed, and the centrifuge is not running.
Please confirm that the door cover is closed properly.