North American Clutch & Driveline
Rockford, Illinois
Phone: (800) 383-9204
(815) 282-7960
Fax (815) 282-9160
www.naclutch.com
34
9.2.1 Notice the direction clevis pin (414 and 416) are installed. Upon reassembly of
the clutch they must be installed from the same side so the head leads the direction of
clutch rotation. They should be as shown on the next page.
9.2.2 Remove retainers (417) and clevis pins (416) to Seperate the links (413) from the
levers (123)
9.3 Disassemble the sleeve and bearing assembly.
9.3.1 (Ball type release bearing): remove the grease hose (32) (if the bearing is a
greasable style).
9.3.2 Remove retainers (415) and clevis pins (414) to remove the connecting links (413)
from the release sleeve.
9.2 Remove the release sleeve and bearing assembly.
Note: Sleeve used with bronze-
type release bearing is shown.
.120” basic groove width
.137” basic groove width
(note: this design has no hole for a
grease hose)
(note: this design has no hole for a
grease hose)
