Nabco GT20, Wire And Programming Manual

Page: 31 / 43

31 of 43
www.NabcoEntrances.com GT20 Wire and Programming Manual
Rev 5-7-18 P/N C-00140
Element Default Value Description
ILExit Active Active
Inactive
X
X
Airlock functionality works in Exit mode.
X
X
Only visible if InterL is not OFF
ILNight Active Active
Inactive
X X
Airlock functionality works in Night mode.
X X
Only visible if InterL is not OFF
Table 13
Diagnostic Menu: Diagnostic Tool
Element lu Description
K-I-O-R-S-P -E Displays all Input Commands (+) Active, (-) Inactive
(K) Key Key Input
(I) OEI Interior Activation Sensor
(O) OEO Exterior Activation Sensor
(R) SER Push Side Door Mounted Sensor (Approach side)
K-I-O-R-S-P -E (S) SES Swing Side Door Mounted Sensor
(P) Swing Side Header Mounted Presence Sensor
(E) EMY-IN Emergency Open Input
0.3A
0°
Displays actual current used by the Motor and the current Angle of the Door Panel (Example: 5.1A; 95°)
30° C
19 32
Displays the:
X
X
Current temperature measured on the PCB (Logic Print) on the first and second line.
X
X
Current minimum and maximum temperature since the last reset system.
OK will reset any/all stored (Min/Max. Values)
SimulateKey Key Command that opens the Door Panel by pressing OK
E-Lock L Displays the status of the Lock. L+ Locked
L- Unlocked
FB Displays input El-FB. Press OK to actuate the
Electric Lock.
FB+ Locked
FB-
Unlocked
PG Version Packaged Software
SW Version Version of Software
UL Version Software changed due to UL specifications
HW Version Version of Logic PCB
Cycles Total number of openings (this value is memorized).
R0 R1 FP RP Displays what the Door Panel is doing.
R0 Relay print with address 0 - Identified and ready for operation
R1 N/A + Neither identified nor registered
FP N/A a Defective or Error
RP N/A x Removed
Table 14
Error Active
Element
Description
ERROR ACTIVE Error Active list is updated with the latest additions appearing at the end.
A0 indicates the most recent Active Error.
Table 15
History Error
Element
Description
HISTORY ERROR List of Active Errors that were detected and corrected or not corrected.
H0 indicates the most recent Active Error