NA-DE V-BUS7, Installation Manual

Page: 95 / 132

24
USER MANUEL
Keypad Panel’s ID setting is made when CENTRAL UNIT is in SETUP MODE. Function LED is blue and status LEDs
signal in Sequence. Please waitin completing the scanning.
ID assignment:
Screen-4.1
is displayed when CENTRAL UNIT is in SETUP MODE. Choose an ID number among 1 to 15 and enter it by key
strokes. When ID number is accepted then you will see Screen-4.2 ; otherwise if ID number doesn’t accepted then you will
see Screen-4.3 and you should try another ID value.
SCREEN-4.1 SCREEN-4.2 SCREEN-4.3
Main Screen:
Main screen shows instructions of using the panel.
SCREEN-4.4 SCREEN-4.5
MENU:
Panel settings is made in MENU screen. In order to switch to MENU screen just pres enter when Main Screen is displayed
as shown in
Screen-4.6 . You must enter admin password (admin password is 1234 as default.)
MENU items can be selected by up/down buttons ( which shown in Screen-4.8 and 4.9 ).
SCREEN-4.6 SCREEN-4.7 SCREEN-4.8 SCREEN-4.9
Panel System settings:
Enter to SETTINGS by choosing it from MENU items (screen-4.9) . Enter to PANEL by choosing it from SETTINGS items
(screen-4.11 and 4.12) . MENU items can be changed by up/down buttons.
** PANEL ID : Shows Panel ID value and it can not be changed. Panel ID defination is assigned onl in SETUP MODE.
** TOTAL FLAT NUMBER: Shows the total number of flats in 1 block. Becareful to enter this value correctly !
** DOORKEEPER : Shows total numbers of external and internal doorkeepers. Value is 0 when there is no doorkeeper.
** SECURITY: Shows total numbers of security phone. Value is 0 when there is no security phone.
** TOTAL BLOCK NUMBER: Shows total numbers of out panels when external line used for outdoor panels.
Total Block number is “1” when CENTRAL UNIT is not conencted to external line.
SCREEN-4.10 SCREEN-4.11 SCREEN-4.12
Entering/Erasing a contact to index:
Enter to RECORD by choosing it from MENU items (screen-4.8 and 4.13) . You can choose NEW RECORD to enter a new
record or choose “DELETE RECORD”. In order to edit an existing record choose “NEW RECORD” , refer Screen-4.13 and
4.14 . You can enter the flat name and flat number to add new record or choose existing number to delete it.
SCREEN-4.13 SCREEN-4.14 SCREEN-4.15
< SETUP >
ID NO : 1 _
DEL DEL ENTER SEND
< SETUP >
ID NO : 1
DEL DEL ENTER SEND
< SETUP >
ID NO : 1
DEL DEL ENTER SEND
BLOCK NAME
FOR QUICK CALL
ENTER THE NUMBER
AND PRESS ENTER.
BLOCK NAME
TO CHOOSE MENU OR
INDEX, PRESS ENTER
AND USE ARROWS.
BLOCK NAME
ENTER DEL BACK SELECT
INDEX MENU
< MENU >
DEL BACK ENTER OK
ADMIN PASSWORD
_
< MENU >
DEL BACK ENTER SELECT
2/5
+ RECORD
+ DOOR PASSWORD
+ ADMIN PASSWORD
+ BLOCK NAME
< MENU >
DEL BACK ENTER SELECT
5/5
+ SETTINGS
< SETTINGS >
DEL BACK ENTER SELECT
+ PANEL
+ SYSTEM INFO
+ LANGUAGE
+ MASTER RESER
< PANEL>
DEL BACK ENTER SELECT
+ PANEL ID
+ ALL CONTACTS
+ DOORKEEPER
+ SECURITY
2/5
1
85
0
0
< PANEL>
DEL BACK ENTER SELECT
+ NO OF BLOCK
5/5
1
< RECORD >
DEL BACK ENTER SELECT
+ NEW CONTACT
+ DELETE CONTACT
< NEW CONTACT >
DEL BACK ENTER SAVE
APARTMENT NO : 216
NAME :
JOSEPH ROWDON_
SAVED !