background image

 

Page 3 of 19 

Introduction 

 

Congratulations!  You have chosen the Mytrex MXD-LTE Personal Emergency Response System. 
 
The MXD-LTE has been created to provide you comfort, reassurance, and peace of mind making 
it possible for help to be just a touch of a button away.  
 
Pressing your water-resistant personal help button (PHB) will immediately activate the MXD-
LTE unit.  Within seconds, your response center will be notified of your need for assistance.  
When a call for help is received, the response center’s computers provide an attendant with all 
of your personal information.  The attendant will talk to you through the MXD-LTE unit’s 
speaker.  The attendant will then telephone your family, friends, or emergency services based 
on the assistance needed.  Even if you cannot hear or speak to the attendant, help may be 
summoned for you.  
 
The MXD-LTE unit is fast and simple to install.  Your service provider’s representative may 
connect the MXD-LTE unit during an installation visit, you may elect to do it yourself, or you 
may ask a friend or relative to install it for you.   
 
To ensure that you always receive the fastest response time possible, it is important to notify 
your service provider of any desired changes to your personal account information.  Your 
response center needs to be aware of changes to your address, telephone number, responder 
information, medical history, allergies, doctor information, hidden key location, and other 
information you wish to have on file.  
 
Always wear your PHB and test the system often!  
 
Please contact your service provider if you have any questions or concerns after reading this 
manual.  You can enter your providers contact information here: 
 
 
Company Name:  

___________________________________________________ 

 
Contact Name: 

___________________________________________________ 

 
Telephone Number:  ___________________________________________________ 

 
 

 

Summary of Contents for MXD-LTE




















Reviews: