Page 9 of 19
Audible Alarm
When your MXD-LTE is calling for help, an audible message “calling for help” will be heard through the
speaker along with a series of beeps. This is to let you know that the MXD-LTE is responding to you
pushing your Personal Help Button. In some installations, such as domestic violence, these audible
signals can be suppressed if desired. Contact your provider to suppress these audible signals.
Setting Up Your MXD-LTE
Your MXD-LTE allows you to request assistance 24 hours per day, seven days per week by simply
pressing your Personal Help Button.
Installation Steps
1.
Plug the MXD-LTE power block into an AC
power outlet
that is not controlled by a light
switch.
(Figure 5)
2.
Place the power switch, located on the rear
of the unit, into the on (“I”) position. The
status light on the MXD-LTE will begin to
flash orange.
3.
After a short time, the MXD-LTE will state “System
Ready.” The status light located on the left edge
of the large HELP button will appear steady
green, indicating that the MXD-LTE is connected
properly, and the cellular radio has been
activated with the cellular company.
4.
Test the range of the PHB to make sure it works
throughout the home and yard. See
Testing the
PHB (Range Test Mode),
below
.
5.
Initiate your first call to the Response Center by
pressing the PHB or the HELP button.
Please contact your service provider if the
MXD-LTE does not connect
.
Figure 5: MXD-LTE Rear View
Mode Button
On/Off Switch
RESET Button
Status Light
Figure 6: MXD-LTE
Top View
