09
HI-LINE Super RC
11.0 Operating Instructions
Description
This HI-LINE Super unit is fitted with a control system that
provides either automatic or manual control of the unit. In
automatic mode the desired temperature set point is selected
and the unit will adjust the fan speed according to the difference
between the actual room temperature and the set point. When
the room temperature reaches the set point the fan will switch off
and thereafter will continue to cycle on and off to maintain the
room temperature. The temperature set point range is 15 - 35°C.
In manual mode the automatic temperature control is
overridden and any of the three fan speeds can be operated
inrespective of the water temperature in the unit. This means
that air circulation can be provided in summer for example, or
that heating performance can be controlled manually.
In manual mode, with water temperature control, any of the 3
fan speeds can be selected and the fan will operate when the
water temperature in the coil is greater than 32°C. This means
that heating performance can be controlled manually, and the
unit could be controlled via an external room thermostat.
The unit can be controlled using the infra red remote control
handset supplied with the unit (see fig. 6) and also using the
control panel on the unit (see fig. 7). If necessary, however, the
control panel can be locked electronically to prevent tampering
once the controls have been set (see below).
The remote control hand set takes 2 AAA batteries (not supplied).
Fig. 6
Fig. 7
Controls
Display
Power button
Switches unit on & off
‘+/-’ button
Adjust temperature set point from
15 - 35°C
Scrolls into F1, F2 or F3 manual mode
Heating
Heating will only be provided when the central heating
boiler is on, the pump is running and the system water
temperature is greater than 32°C. Ensure the boiler is on,
and set timer, boiler controls and room thermostats as
necessary.
10.0
11.0
23674 HiLine Super RC manual 27/06/2011 09:25 Page 10
