Myria MY4014, User Manual

Page: 25 / 40

RO MY4014 - Manual de utilizare
25
INTRODUCTION OF CONTROL PANEL
(The silkscreen is subject to change without prior notice.)
AFTER POWER-UP
As soon as the bread maker is plugged into the power supply, a beep will be
heard and “3:10” appears in the display after a short time. But the two dots
between the “3” and “10” don’t flash constantly. The arrow points to 900g and
MEDIUM. It is the default setting.
START/STOP
The button is used for starting and stopping the selected baking program.
To start a program, press the START/STOP button once. A short beep will be
heard and the two dots in the LCD begin to flash, the working light illuminates
and the program starts. Any other button is inactivated except the START/
STOP button after a program has begun. This feature will help to prevent any
unintentional disruption to the operation of program.
To stop the program, press the START/STOP button for approx. 2 seconds, then
a beep will be heard, the working light will be extinguished, it means that the
program has been switched off.
PAUSE function
After procedure starts up, you can press START/STOP button once to interrupt
at any time, the operation will be paused but the setting will be memorized, the
working time will be flashed on the LCD. Touch START/STOP button again or
within 10 min without touching any button, the program will continue.
MENU
It is used to set different programs. Each time it is pressed (accompanied by a
short beep) the program will vary. Press the button continuously, the 15 menus