MYERS MP Series, Installation, Operation & Maintenance Manual

Page: 16 / 149

16
2.
The Input line power is connected to the terminal block marked “L IN”.
3.
The Output power is connected to the terminal block marked “L OUT”.
4.
An optional surge suppressor, external PC or a vacuum cleaner for maintenance
may be plugged into this receptacle.
5. The optional battery heater mat is plugged into this receptacle.
6.
The “BBS OUT” cord is plugged into the Quick Connect Connector socket or
connected to the AC OUTPUT terminal block on the MP2000E.
7. The Black and Red PTS control wires are connected at PTS plug on face of MP2000E
Quick Connect Connector.
8.
The “BBS IN” cord is plugged into the Quick Connect socket or connected to the AC
INPUT terminal block on the MP2000E.
9. The circuit breaker provides input power protection for the MP2000E BBS.
10. The dual receptacles are protected by this circuit breaker.
1.1.4 Batteries
Different Amp-hour capacities or sizes of batteries can be used in the MP2000E system
to provide various backup times. Four batteries are connected in series for the required
48VDC. Contact customer service at Myers Emergency Power Systems. for information
on the battery best suited for your application. The battery harness supplied with the
system is polarized and equipped with Molex type connectors. The battery harness
provides a heavy-duty connection for each battery, so it is possible to unplug or hot swap
them. Each of the four batteries may be connected in any order using the provided
harness.