7
4. GENERAL INSTALLATION LAyOUT GUIdE
Plan your installation carefully. Check on the nearest
and most accessible rising main water supply, this
may be beneath the bath or in the loft, where it feeds
the water storage tank. Use only the cold rising
water main.
Avoid connecting the shower unit if possible where
it will be affected by water drawn off by another
appliance.
For example from the mains feed to the toilet as this
may cause a drop in pressure to a level that is too low
for the shower unit to work correctly.
A WRAS (Water Regulations Advice Scheme) listed
isolating valve must be fitted between the rising main
and the unit to comply with water regulations and to
allow for routine maintenance and servicing.
BATH
COLD WATER
MAINS SUPPLY
SEPARATE PERMANENTLY
CONNECTED SUPPLY
FROM CONSUMER UNIT
ISOLATING
STOP TAP
DOUBLE POLE
HEATER SWITCH
WALL MOUNTED
IN ACCORDANCE
WITH LOCAL
AUTHORITY
REGULATIONS
SHOWER
UNIT
BATHROOM
FLOOR
CEILING JOISTS
IMPORTANT
This appliance is not intended for use by persons (Including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
!
!
!
!
Summary of Contents for Thermo Response QI
Page 27: ...27 Notes...
