15
11. FITTING THE FRONT COVER
IMPORTANT: it is necessary to align the flow control
knob on the cover with its opposite control spindle
before the cover is fitted. In addition connect the flying
lead from the PCB to the rear of the front cover.
First turn the flow control knob anti-clockwise to the
mechanical stop position (maximum flow).
Then rotate the flow control spindle on the back plate
fully anti-clockwise to the mechanical stop position
(maximum flow).
Hold the front cover carefully and attach the flying
lead from the control PCB (ensuring that the lock
tags are aligned with the slots on the display PCB
connector) to the rear of the front cover as illustrated
making sure that the connector pins are fully engaged.
The cover can now be fitted. Please ensure that the
flow control knob engages with the spindle correctly
and the connector ribbon is not trapped between the
covers. The front cover can now be secured with the
four fixing screws provided.
Following the installation of the riser rail (see section
12), attach the flexible hose to the shower outlet
positioned centrally on the back plate making sure
that you use the seal washer provided. The shower is
now ready for commissioning.
STOP
STOP
Temperature
Flow
START/STOP
Temp
erature
Thermo Response
QI
Temperature
Flow
START/STOP
Temp
erature
Thermo Response
QI
Summary of Contents for Thermo Response QI
Page 27: ...27 Notes...
