3G-SDI ST2110 Over IP Gateway Converter
Operation Manual
© MuxLab Inc. 2022
39
3. Frequently Asked Questions
The following FAQ section provides answers to the most frequent questions you
may have regarding the configuration of the 500767-2110.
What is the default IP address of the 500767-2110?
By default the 500767-2110 is configured in DHCP mode. If no DHCP server is
available the unit will fall back to its default static IP address:
As a Tx,
Console LAN port:
192.168.168.64/255.255.255.0
Media 1 port:
192.168.168.65/255.255.255.0
Media 2 port:
192.168.168.66/255.255.255.0
As a Rx,
Console LAN port:
192.168.168.67/255.255.255.0
Media 1 port:
192.168.168.68/255.255.255.0
Media 2 port:
192.168.168.69/255.255.255.0
How to find the 500767-2110 IP address?
You can check
the unit’s IP address by using either Wireshark or going to your
network switch Web interface.
Why cannot I connect to the 500767-2110 GUI?
Ensure that
your computer is on same subnet. For instance, if the TX’s IP address
is 192.168.168.64/255.255.255.0 your computer must be configured as follows:
192.168.168.x/255.255.255.0, where x may be 70 or something similar.
