3G-SDI ST2110 Over IP Gateway Converter
Operation Manual
© MuxLab Inc. 2022
28
2.2 500767-2110 API (NMOS and RestAPI)
In addition to the Web interface, the 500767-2110 can also be managed through
a RestAPI and NMOS management platforms.
NMOS:
The 500767-2110 supports NMOS IS-04 (for unit discovery) and IS-05 (for unit
connectivity management). NMOS is supported via the unit control port, which by
default is the 1G Ethernet port (labelled as: Console LAN). Note that control can
also be transferred to one of the media ports (labelled as: Media 1 or Media 2) via
the web interface if required.
Prior to interfacing with any NMOS control software, please go to the 500767-2110
Receiver web interface, and navigate to the Input Type field under the Media tab,
and select NMOS from the pull-down menu. You can then make use of an NMOS
control software (please refer to the NMOS control software operation manual for
further details on this software). Note that the NMOS control software should be
on the same network segment as the control port mentioned above.
RestAPI:
This section describes the RestAPI commands supported on the 500767-2110. It
is intended for users with a programing background. Note that the part number
500767 and 500767-2110 may be used below in the API and in the replies, please
take note that this is OK.
[500767-TX IP Address]/api/[RestAPI Command]
Enter
[500767-2110-TX IP Address]/api/
to obtain a list of RestAPI Commands
[
"system",
"video",
"audio",
"sdp",
"security",
"ptp",
"others"
]
