3G-SDI ST2110 Over IP Gateway Converter
Operation Manual
© MuxLab Inc. 2022
10
2. Managing the 500767-2110
The 3G-SDI/ST2110 over IP Uncompressed Gateway can be managed through
its Web interface and API. The system supports the ST-2110 protocol, and ST-
2022-7 Redundancy for critical applications. This section describes how to set up
the 500767-2110 parameters using both the Web interface and the API.
2.1 Web interface
Configuring the 500767-2110 from the Web interface requires a TCP/IP connection
from the unit 1G Ethernet port to your network. The 500767-2110 default IP
address is set to DHCP. If no DHCP is available on your network, as a TX,
“Console LAN” port / “Media 1” port / “Media 2” port will be 192.168.168.64/65/66
addresses respectively. As a RX,
“Console LAN” port / “Media 1” port / “Media 2”
port will be 192.168.168.67/68/69 addresses respectively.
To be able to log in to
the 500767-2110 Web interface, your computer has to be in the same subnet
.
The Console LAN port and Media 1 and Media 2 media/data ports are shown below
(media ports are shown without the included SFP module).
