Muton XPJ-1682WR Operation Manual Download Page 14

Page: 14 / 158

14 System configurations of this product

System configurations of this product

MUTOH Status Monitor (MSM)

Linking with a printer driver, a status check or maintenance

of the printer can be conducted.

When user registration is done to the MUTOH Club, the

latest service can be always provided.

Main functions:

• Status monitor

• Remote panel

• MPS (MUTOH Print Server)

MSM Mobile

Enables you to remotely monitor

printer status and control your

printer through remote panel on

your smartphone or tablet.

*1 MUTOH Club

This Web service provides free useful contents to users.

Have user registration done to use various services.

Main functions:

• Downloading the latest application and manual

• Downloading media profiles

• Printer status check (When using the printer information

supplying service of MSM)

MUTOH Club server

Connect to the MUTOH Club.

https://club.mutoh.co.jp/mutoh/guser

Internet

To get the best out of this product, use the MUTOH Print Server (MPS) function

available from MUTOH Status Monitor (MSM).

You can download the latest version of MSM from the MUTOH Club Server.

(To use MPS, specify the output port of RIP software to MPS.)

Summary of Contents for XPJ-1682WR































































































































































Search results

Summary of Contents for XPJ-1682WR

Reviews:

Related manuals for XPJ-1682WR

Brands by name

Popular brands

Muton XPJ-1682WR, Operation Manual

Search results

Summary of Contents for XPJ-1682WR

Reviews:

Related manuals for XPJ-1682WR

Brands by name

Popular brands