MUTOH XPJ-461UF Operation Manual Download Page 81

Page: 81 / 162

Set2: Advanced 81

• 6-color configuration

Nozzle Settings

Steps

Print the select nozzle patterns and find the pattern that does not have missing lines.

Go to "Nozzle Settings" and choose the pattern selected in the Step 1.

•

Select “ALL”, or one of “A” to “D”.

Type

US11

UH21

Light

Perform automatic white ink maintenance less

frequently.

If you are printing with the white ink, perform

cleaning as needed.



Normal

Default setting.



Full

Use this mode when color inconsistencies

appear on the print.



N/A

Advanced Settings 11: Select Nozzle

If missing lines still persist after several attempts of cleaning, you can check the
nozzle conditions by printing the select nozzle patterns and choose only good
nozzles for printing.

• This feature is disabled for single-layer printing.

• This feature is enabled only when the effect setting is set to "i-Weave UV" or

"None".

Setting values

"Confirm pattern" P. 82

"Nozzle Settings" P. 82

Goes to the nozzle settings menu.

Submenus

Nozzle All / Nozzle A to Nozzle D

Advanced Setting11

Select Nozzle

Select Nozzle1

Print

Select Nozzle2

Nozzle Settings

Select Nozzle2

Nozzle Settings

Nozzle Settings：

Nozzle ALL

Summary of Contents for XPJ-461UF



































































































































































Search results

Summary of Contents for XPJ-461UF

Reviews:

MUTOH XPJ-461UF, Operation Manual, Page: 81 / 162

Search results

Summary of Contents for XPJ-461UF

Reviews: