MUTOH XPJ-461UF, Operation Manual, Page: 41 / 162

Nozzle check and cleaning 41
[6] Look at the print.
• If you find missing or thin lines on the print, go to "Perform cleaning" P. 41 .
• If all lines are clearly printed, you can start printing.
Note
• The figure above is an example of the Nozzle Check B pattern. In this example, non-colored background area is shown in gray.
• Printer information (Data and time printed, serial number, firmware version) is printed next to the pattern.
2.
Perform cleaning
[1]
Check that the message on the left is displayed.
[2]
Tap .
[3]
Use or to choose the cleaning mode.
Tap [Enter].
• The printer will start cleaning.
[4] Run a nozzle check print again.
"Run a nozzle check print" P. 39
• If the nozzles do not recover after several normal cleaning attempts, try "Long" or "Little Charge" cleaning.
For the details of cleaning, see "Head cleaning" P. 123 .
Note
If "Long" or "Little Charge" cleaning does not help to recover the nozzles, go to "Advanced Settings 11: Select Nozzle" P. 81 to select the
nozzles that fire properly.
M C VA VA K WH WH Y
6 Color
WH WH
Print Ready
Type 1
Clean Print Head？
Short
Clean Print Head？
Normal
Clean Print Head？
Long