MUTOH XPJ-461UF, Operation Manual, Page: 76 / 162

76 Set2: Advanced
Layer Multi Strike3: Varnish Layer
Sets the number of times to print the same line in varnish layer (clear topcoat).
Setting values
<1 times> to 9 times
<> indicates the default setting.
Advanced Settings 2: Pass Wait
Sets the waiting time between passes in multi-strike setting and normal
printing.
Setting values
<0.0 sec.> to 5.0 sec.
<> indicates the default setting.
Advanced Settings 3: Head Travel
Sets up the range that Print head moves while printing.
Setting values
Print head moves the range of the print
data width.
• The print head will travel the maximum
distance possible with the printer.
Print head shifts within the media width.
This is the default setting.
Advanced Settings 4: Bottom Interlace
Sets the BottomInterlace function.
Setting values
Auto / <On>
<> indicates the default setting.
Layer Multi Strike3：
Varnish Layer
Varnish Layer：
(1-9) 1cnt
Advanced Setting2
Pass Wait
Pass Wait：
(0.0-5.0) 5.0sec
Advanced Setting3
Head Travel
Head Travel：
Data
Head Travel：
Machine
Head Travel：
Media
Advanced Setting4
Bottom Interlace
Bottom Interlace：
On