MUTOH XPJ-461UF, Operation Manual, Page: 62 / 162

62 Set1: User Type
4 Menu1: Setup
The User Type is one of user-settings to set media types and printing conditions for printing.
Set1: User Type
You can have up to 10 groups of User Type, labeled “Type1” to “Type10”. When
you select a User Type group (“Type”) and tap [Enter], that definition group will
be set for the printer. Also, a submenu will be displayed.
Setting values
Select a “Type” number, from “Type1” to
“Type10”.
Important!
When you have changed to another User Type, all the settings that are alterable via the User Type will be changed to the values in
the currently selected User Type.
• When the “media setting” for the user type settings have been changed, the settings for the “media size” and “origin position”
are changed to the settings of the selected user type. That means the print start position will also change. Make sure that the
printer will start printing from the intended position. If not, the printer could print onto the wrong part(s) of the media or print
outside it.
“Detailed-Set: On” (on/off for the set check display when a media is set on the table) only appears when the User Type is selected
for the first time. Use or to select “On” or “Off”, and tap [Enter].
• If you select “Detailed-Set: On”, you will have to input the media size and origin position after tapping each time you set
a media on the table.
• If you select “Detailed-Set: Off”, “Ready to Print” will be displayed after tapping each time you set a media on the table.
The currently selected User Type values will be used for the media width and length and origin position.
• Even when "Detailed-Set" is set to Off, you can enter media height, obstacle detect, media size and origin position from the
“**: Media Setting1 Set Media” by tapping [Cancel] while the message "Print Ready" or “Set media then tap [
∧
] key.” appears
on the panel.
Configures the printer settings for selected User Type.
Submenus
**>1: Print Mode
**>2: Adjust Print>
**>3: PF Adjust
**>4: Vacuum Fan
• If you are not using the optional
vacuum table on the printer, this menu
does not appear on the panel. The rest
of the menus will be displayed with a
different menu number.
Menu1: Setup
Setup1
User Type
User Type：
Type1
User Type：
Type1
Type ** : 1
Print Mode
Type ** : 2
Adjust Print
Type ** : 3
PF Adjust
Type ** : 4
Vacuum Fan