MUTOH XPJ-461UF Operation Manual Download Page 14

Page: 14 / 162

Displaying the Printing Preferences screen of printer driver

[1]

Windows 10

Click [Start], [All Apps], [Windows System], then [Control Panel].

In the screen that appears, click [Devices and Printers].

Windows 8 / Windows 8.1

Display the charm bar on Desktop, and click [Settings]. Click [Control Panel] - [View devices and printers].

Windows 7

Click [Start] - [Devices and Printers].

[2]

Right click the “MUTOH XPJ-461UF” icon and click [Printing
preferences].

• The “Printer Configuration” dialog box opens only at the first time.
• The Printing Preferences screen of printer driver opens from the

second time.

[3]

Select the ink type and the ink configuration settings and click [OK].

• After clicking, the Printing Preferences screen of printer driver

opens.

Note

• If you use the Windows printer driver, make sure to select the ink type and the ink

configuration settings of your printer.

• If you selected the wrong ink configuration, go to [Utility] > [Printer Configuration]

and select the correct one.

Printing Preferences screen of printer driver

Summary of Contents for XPJ-461UF



































































































































































Search results

Summary of Contents for XPJ-461UF

Reviews:

MUTOH XPJ-461UF, Operation Manual, Page: 14 / 162

Search results

Summary of Contents for XPJ-461UF

Reviews: