MUTOH XPJ-461UF Operation Manual Download Page 15

Page: 15 / 162

Launching/Displaying/Exiting MUTOH Status Monitor (MSM)

The remote panel allows you to view the printer status or remotely operate your printer.

Launching/Displaying/Exiting MUTOH Status Monitor (MSM)

Launching MSM

Windows 8 / Windows 8.1

• In the [Start] screen, click [Desktop].

• Double click the MSM icon on the Desktop.

Windows 10 / Windows 7

Double click the MSM icon on the Desktop.

Note

Launching from the Start Menu of Windows

• Windows 8 / Windows 8.1

Right click somewhere the [Start] screen tiles are not displayed to display the application bar, and click [All Apps].

• Windows 10 / Windows 7

From the [Start] menu, click [All Programs] (or [All Apps]) - [MUTOH] - [MUTOH Status Monitor].

Displaying MSM

Double click the MSM icon in the task tray.

Displaying remote panel

Click [Remote Panel].

•

The remote panel opens.

Summary of Contents for XPJ-461UF



































































































































































Search results

Summary of Contents for XPJ-461UF

Reviews:

MUTOH XPJ-461UF, Operation Manual, Page: 15 / 162

Search results

Summary of Contents for XPJ-461UF

Reviews: