MUTOH XpertJet XPJ-1641SR, Startup Manual

Page: 42 / 48

42 Safety Precautions
Installation Precautions
When installing this product, avoid the location where
• the floor is not flat and level.
• the product gets vibration from the neighboring devices.
Failure to do so may result in injury from a fall.
DO NOT tilt or turn the product upside down.
The ink inside the printer may spill.
MUTOH cannot guarantee that the printer can run
properly.
Keep this product level when moving.
Minimum four people are required for unpacking or
moving this product.
Before taking out the printer from the packing box,
remove the plastic sheet wrapped around the printer
first.
Failure to do so may cause slip or damage to the product.
This equipment is not suitable for use in locations
where children are likely to be present.
Product Handling
DO NOT sit on or place heavy objects on the product.
Failure to do so may result in injury from a fall.
Follow the precautions below when cleaning the
cleaning wiper or around the print head:
• DO NOT reuse the cleaning stick.
Dust on the stick may damage the print head.
Follow the precautions below when cleaning around
the print head:
• DO NOT touch the surface of the print head.
This may damage the print head.
• DO NOT touch the cleaning stick with your finger.
The oil from your finger may damage the print head.
• DO NOT use water when cleaning with cleaning
sticks.
This may damage the print head.
Follow the precautions below when cleaning the
cleaning wiper.
• DO NOT touch the cleaning wiper and head cap unit
with your bare hands.
The skin oil from your finger can result in improper
cleaning.
• Use a dry cleaning stick to clean the wiper. DO NOT
moisten the stick with water.
This may cause the nozzle clogs.
WARNING
CAUTION
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
WARNING
CAUTION