Printer Initial Setup
25
[3]
Open an ink case and apply an ink color label onto the inside of the
case.
Note
• The ink color label is supplied with the ink case.
• The label should be applied onto the glossy surface of the case.
[4]
Open the ink bag case to put the ink bag into the case.
[5]
Close the case.
Important!
Check that the spout of ink bag is properly fitted into the groove in the
case.
If not fitted, the printer cannot correctly detect the ink bag.
Close the latches (×4) of the case properly.
Important!
Check that all the latches (×4) are closed.
If not, it may cause ink spillage.
[6]
Apply an ink color label onto the outside of the case.
Note
• The label should be applied onto the glossy surface of the case.
• Make sure to match the color of the label with the one applied onto the inside of the
case.
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
Summary of Contents for XpertJet XPJ-1641SR
Page 46: ...46 Safety Precautions Note...
Page 47: ...Safety Precautions 47 Note...
Page 48: ...XPJ16xxSRE Q 01...
