MUTOH XpertJet XPJ-1641SR, Startup Manual

Page: 3 / 48

Site Preparation 3
The installation site must meet the power specification and environmental requirements below.
• Printer:
Input voltage: AC 100V to 120V±10% / AC 200V to 240V±10%
Input frequency: 50 / 60Hz ±1Hz
Input load current: 9 A (AC 100V - 120V), 6 A (AC 200V - 240V)
• Heater:
Input voltage: AC 100V to 120V±10% / AC 200V to 240V±10%
Input frequency: 50 / 60Hz ±1Hz
Input load current: 10 A (AC 100V - 120V), 5 A (AC 200V - 240V)
• Operating condition:
Temperature: 20°C to 32°C, Humidity: 40% to 60%, non condensing
• Printing Condition:
Temperature: 22°C to 30°C, Humidity: 40% to 60%, non condensing
Change rate
Temperature: No more than 2 °C per 1 hour
Humidity: No more than 5% per 1 hour
• Printer Storage Condition:
Without ink filled: Up to 6 months (Temperature: -20°C to 60°C, Humidity: 20% to 80%, non condensing)
With ink filled: Up to 1 week (Temperature: -10°C to 40°C, Humidity: 20% to 80%, non condensing)
Storage up to 4 days maximum when stored between 32 °C to 40 °C.
• Ink Storage Condition:
Black / Cyan / Magenta / Yellow/ Light Cyan / Light Magenta / Light Black (1,000 ml each)
Temperature: -20°C to 40°C, Humidity: 5% to 85%, non condensing
Cleaning bag (300 ml)
Temperature: 5°C to 40°C, Storage up to 6 months maximum when stored between -5 °C to 5 °C or 30 °C to 40 °C.
Humidity: 80% or less non condensing
Power Specification
Important!
This product has two power cords for printer and heater and requires the total load current as follows:
• XPJ-1641SR/XPJ-1682SR: 19 A (AC 100V - 120V),11 A (AC 200V - 240V)
If the total current exceeds the maximum capacity of the wall outlet with two or more jacks, connect one of the two power plugs
into another wall outlet.
Environmental Requirements
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation