Test printing
33
[5]
From the front side of the printer, pull the media for approximately
1 m.
[6]
While one person holds the front edge of the media, the other person turns the flange to slightly rewind the media
onto the roll to remove warp or skew.
Note
If you remove your hands from the front edge of the media while rewinding, the media can be removed from the media slot.
[7]
Check that the right-hand edge of the media is located at the left side of the media guide line.
If not, print quality can be affected.
[8]
If needed, use a slide lock lever on the pressure rollers to individually cancel or reduce the pressure.
Operation Manual ”Canceling or reducing pressure rollers individually” P. 42
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
Summary of Contents for XpertJet XPJ-1641SR
Page 46: ...46 Safety Precautions Note...
Page 47: ...Safety Precautions 47 Note...
Page 48: ...XPJ16xxSRE Q 01...
