Assembling
9
Follow the steps below to attach the printer to the stand.
[3]
Use the round head screws (×4) to attach the waste ink tank holder to
the right leg.
[4]
Shake the stand to make sure that each part is firmly attached.
[5]
Turn the leveling adjusters (×4) as shown on the left until the stand
does not move.
Attaching Printer
• Minimum four people are required for this process.
• When taking out the product from the packing box, remove the plastic sheet wrapped around the
product, then take out the product. Failure to do so may cause slip and damage to the product.
• Keep the product level while attaching.
[1]
Lift the printer with at least four people and mount it on the stand.
• Use two lifting bars to insert into the guide holes at the bottom left and right of the printer, and lift up on the stand.
Leg (right)
Screws
Waste ink tank holder
× 4
Stand
Adjusters
Adjusters
Connecting Power
and Network
Printer Initial
Setup
Viewing
Operation Manual
Safety
Precautions
Unpacking
Assembling
Test printing
Installing MSM
Site Preparation
CAUTION
Summary of Contents for XpertJet XPJ-1641SR
Page 46: ...46 Safety Precautions Note...
Page 47: ...Safety Precautions 47 Note...
Page 48: ...XPJ16xxSRE Q 01...
