MUTOH Falcon Outdoor Jr., Operation Instructions Manual, Page: 56 / 71

Falcon Outdoor Jr. – Operation Instructions
Page
56 PN: MAI-75039
Rev. 1.A – 07/26/05
Process Status Buffer is cleared
Printing Status Print is cancelled, buffer is cleared,
printed part is cut-off.
To request a sheet-off, press cancel for 2 seconds and confirm
with [ENTER].
4. Cleaning :
¾
Pressing for 2 seconds initiates the cleaning
procedure.
¾
When pressed together with the [SHIFT] key, (9) it
initiates the head adjustment procedure.
¾
Go to the Previous Menu, when in menu-mode
operation.
¾
For advanced Cleaning Control, enter the menu
system and select submenu [Utility] – option
[Clean].
5. Quality / Speed :
Pressing QUALITY / SPEED will change the output quality and
speed. Each time the key is pressed you will notice the LED
indicator showing the current status : High quality, Normal and
High Speed.
¾
The set-up can only be changed in idle status.
¾
When pressed together with [SHIFT] key (9)
outputs the Test Print.
¾
Go to the Next menu option, or increase a
parameter value when in menu-mode operation.
¾
The LED indication is also influenced by data
coming from the RIP/driver software.
6. Resolution :
¾
Pressing RESOLUTION will change the output
resolution between 360 DPI, 720 DPI or 1440 DPI.
The set-up can only be changed in idle status.
¾
When pressed together with the [shift] key (9) it
allows reverse manual roll feed.
¾
Select the previous menu option and decrease a
parameter value when in menu mode operation.
¾
If both LEDs are ON simultaneously the plotter
operates in one of the 3 available 1440 dpi modes
(horizontal, vertical or diagonal).
¾
The LED indication is also changed by data
coming from the RIP software.