MUTOH Falcon Outdoor Jr., Operation Instructions Manual, Page: 41 / 71

Falcon Outdoor Jr. – Operation Instructions
Page
41 PN: MAI-75039
Rev. 1.A – 07/26/05
4.4.3. Loading roll media
Step 1 :
Open the cover, check that the head is in a position where it will not touch the media keeper
blade and put the hold lever up.
Step 2 :
Selecting the media
Press the Media-key to select media loading sequence with roll
take-up system (Both LEDs ON).
By pressing the key you will see the LEDs alternate between three
choices (sheet, roll and take-up). Now select roll take-up loading
sequence (both LEDs ON).
Now select roll
Note :
When making the wrong choice by selecting cut-sheet when a roll is loaded, the printer
will pull off the maximum cut-sheet length, searching the back edge. Finally the printer
will report a media search error.
Step 3 :
Take your roll of media.
Step 4 :
Remove the movable flange from the scroller by
pulling it off.
Step 5 :
Load the media over the scroller
Turn the roll media as shown in the diagram and pass it over the scroller until the media tube fits
firmly over the fixed flange. Replace the movable flange on the scroller and fit it firmly into the
media tube.