51
Scanning Using the Scanner Buttons
1.
load the originals into the Scanner (see
2.
Press Up/Down arrows to select a preferred scan job (1 through 9)
from the Job Display.
the designated numbers (1~9) correspond to the numbers in the
iDocScan touch panel (see
Scanning Using iDocScantouch Panel
).
3.
Press
<Scan/Stop>
to start scanning to the destination
with the Job Settings you previously configured (see
the “Processing...” bar appears showing the current scan status.
4.
After scanning completes, the scanned image is saved and opened
according to the Scan-to option you select.
NOTE
you cannot scan when the Settings or the Information dialog box is
opened. click [
] or
OK
to close the dialog box before scanning.
ScANNING OPeRAtION
(cONtINUeD)
Summary of Contents for idocscan p45
Page 82: ...P70 P45...
