Mustek idocscan p45, User Manual

Page: 19 / 82

19
2.
load a long sheet of paper one at a time with the front page face
down and the top edge first. Slide the paper straight into the
Scanner until it meets resistance.
3. Adjust the Paper Guides to fit the width of the paper.
Do not make the Paper Guides too tight against the paper, because
that can cause problems to feed.
NOTE
•
Select “long Sheet” from the Scan Size setting when scanning
a long document exceeding 356mm (14”) up to 3000mm (118”)
(see Adjusting the Setting tabs > Scan Settings (For All Scan-to
Options) > Scan Size ).
•
If the document is exceeded the maximum support length for the
ADF, the scanning will stop with an error message appeared. the
exceeded part of the document cannot be scanned.
•
Secure the long paper with your hands during scanning to prevent
paper being fed skewed, which can result in damage to your
original.
•
ensure the Output tray is fully extended for the long paper to be
outputted from the ADF to prevent the paper jam.
lOADING the INPUt tRAy
(cONtINUeD)