Mustang Survival MSD901, User Manual

Page: 14 / 24

STEP
3 Closing the waterproof zipper
a) Fold the protective cover away to expose the waterproof zipper.
b) Grasping the open end of the waterproof zipper with your left hand, begin
pulling the zipper slider with your right hand, continuing to close the waterproof
zipper as far as you can (see fig. 15).
c) Switch hands and with your left hand grasp the zipper slider and continue
closing the waterproof zipper until it is completely closed while holding the suit
with your right hand to gain leverage.
WARNING
Failure to completely close the waterproof entry zipper and the relief zipper will result in
leakage of water inside the suit and reduction in survival time when in the water. Have
a fellow crew member double check each slide fastener to ensure they are completely
closed against their sealing plugs.
d) Unfold the protective cover over the waterproof zipper and snap it in place at
the ends. Adjust the chest ventilation zippers on the outer shell.
STEP
4 Adjusting the MSD901 after donning
a) Adjust the neck seal to a snug but comfortable fit. Do not tighten the neck seal
to the point where it is uncomfortable (see fig. 16).
b) Secure the ends of the neck seal drawstring to the tab located at the outer edge
of the neck seal.
c) Close and adjust the outer shell waist belt.
d) Adjust the ankle, thigh
and wrist straps.
9
FIGURE 16
Adjusting the Neck Seal