l) Unzip the waterproof zipper around the waist circumference and fold the suit
open to expose the upper and lower waist interconnection zippers.
m) Unzip the upper and lower waist interconnection zippers.
n) Unzip the upper and lower interconnection zippers adjacent to the waterproof
relief zipper.
o) Reach between the immersion module and thermal liner to the wrist and pull the
wrist cuff through (inside out) exposing the interconnection zipper.
p) Unzip the wrist interconnection zipper.
q) Repeat steps n) and o) for opposite wrist.
r) Reach between the immersion module and thermal liner to the ankle and pull
the ankle cuff through inside out exposing the ankle interconnection zipper.
s) Unzip the ankle interconnection zipper.
t) Repeat steps q) and r) for opposite ankle.
2. Outer shell
a) Empty contents from all
pockets, including the thermal
hood.
b) Close all vent and pocket
zippers prior to washing outer
shell
c) Unsnap and fold open the
hood.
d) Remove the inflatable pillow from the suit (see
fig. 17).
e) Machine wash in warm water (100˚F) using mild powdered soap.
f) Hang the outer shell to air dry.
g) Outer shell may be tumble-dried on a low heat setting.
h) Upon drying, replace the inflatable pillow in the suit.
3. Immersion module
a) Machine wash in warm water (100˚F) using mild powdered soap.
b) Hang the immersion module to air dry.
12
Inflatable
Pillow
FIGURE 17
Summary of Contents for MSD901
Page 1: ...MSD901 Industrial Dry Suit User s Manual ...
Page 2: ......
