STEP
6 Neck connection
a) Grab the edge of the neck seal on the immersion module and expose the
interconnection zipper.
b) Line up the end of the zipper on the immersion module with the end of the
zipper on the thermal liner (see fig. 9).
c) Fasten the zipper and continue to close until the two are completely joined, then
fold the neck seal back down.
CAUTION
Avoid pinching the waterproof material of the immersion module with the zipper slider.
STEP
7 Waist and waterproof zipper connection - Part II
a) Complete the connection of the immersion module to the thermal liner by
starting at the end of the interconnection zippers that are located at the end
of the opened waterproof zipper. Close the length of the upper interconnection
zipper (see fig. 7).
b) Lay the modules out flat.
4
Thermal Liner
Immersion Module
Thermal Liner
Wrist Zipper
Immersion Module
Wrist Zipper
FIGURE 8
Thermal Liner and the Immersion Module
Connected at the Wrist
Thermal Liner
Neck Zipper
Immersion
Module
Neck Zipper
Immersion
Module
Neck Seal
Folded Back
FIGURE 9
Connecting the Thermal Liner and the
Immersion Module at the Neck
Immersion
Module
Thermal
Liner
FIGURE 6
Insertion of the Thermal Liner Into the
Arm of the Immersion Module
Immersion Module
Waterproof Zipper
Immersion
Module Upper
Interconnection
Zipper
Immersion
Module Lower
Interconnection
Zipper
Thermal Liner Upper
Interconnection Zipper
Thermal Liner Lower
Interconnection Zipper
FIGURE 7
Closing the Lower Interconnection Zipper
Summary of Contents for MSD901
Page 1: ...MSD901 Industrial Dry Suit User s Manual ...
Page 2: ......
