Liberty USERS GUIDE
22
Liberty phone book.
05 Control
Speed
Fast
:
Determines how the “MENU NAVIGATION KNOB” control
responds when it is rotated. Fast is one change per “click.”
Slow
Slow is a change every second “click.”
06 Set
Country
Australia
Select
from a list
of 34
countries
Sets country specific telephone settings.
07 Exit
Menu
Sub Menus of 06 Advanced Setup
01 Control
mode
Local
Gain of both input channels are adjusted by the two front panel
controls on the “local” Liberty.
Master
A pair of Liberty's can be set up to allow the “master” to control the
input gain of the “slave.” The remote Liberty has the volume mode
set to “slave.” Adjusting the Input controls on the “master” varies
the “slave” input gain.
Slave
Set the remote unit to “slave” for control by the “master” Liberty.
Front panel controls are disabled.
Toolbox
Input gain can be adjusted using the Toolbox application.
“Toolbox” mode can be selected on the Liberty or by clicking on
the “Setup for T-box” button in the application. Front panel
controls are disabled.
02 Serial
Port
Toolbox
Configures the serial port for use with a Computer using the
Toolbox
software.
Data
Use for low speed (200bps) data applications such as remote
control or intercom using a TTY terminal.
Disable
Disables the serial port for use with the Toolbox application.
03 Operation
Mode
1 POTS
Mode
Use this mode to connect via a standard (POTS) telephone line.
2 Leased
Line Mode
For operation over leased 2 wire bi-directional lines. As the Liberty
modem requires a loop voltage source for correct operation, an
optional line interface unit is available for use with dedicated 2 wire
circuits where the loop voltage is not present.
3 Telephone Use Liberty as an Emergency phone; You will need to plug
Summary of Contents for Liberty
Page 1: ...LIBERTYTM UsersGuide ...
