Liberty USERS GUIDE
7
Select
Set Input Gain
.
Scroll to Microphone and Select.
You can select
Continue
or
Exit
.
You have now changed the Input type.
•
Set Input 1 and 2 knobs to 2 ‘o’clock position. This sets the outgoing program level.
•
To hear outgoing audio through the headphones (plug into rear socket) set the
Send
knob to 3 ‘o’
clock and
Return
knob to minimum. To hear return audio from the other end - reverse the
Send
and
Receive
knob settings.
•
You are now SET to GO!
•
Repeat steps 2,4 & 6 for the “Destination” Liberty.
•
You can monitor the output using headphones attached to this Liberty. Alternatively, connect the
audio program output as desired on the destination Liberty.
o
Note: the
Return
knob on the destination codec is the headphone volume. It does not adjust
the program output level
.
•
Using the keypad, enter the telephone number of the destination codec and press the
Enter/Dial
key.
Important:
Ensure you have installed your unit correctly as instructed in the
Installation and Usage
Tips
section on page 4.
Unit Setup
[01 Set Input Gain]
02 Intelligent Gain
03 Relay Operation
Set Input Gain
INP1: [Microphone]
Changes Saved…
Continue Setup?
[CONTINUE] EXIT
Summary of Contents for Liberty
Page 1: ...LIBERTYTM UsersGuide ...
